Rather have a pro do it for you?
| Tools and Supplies to Wire Outdoor Wall Lights | ||||
|---|---|---|---|---|
| 1 | Wire strippers | |||
| 2 | Screwdrivers (Phillips and flathead) | |||
| 3 | Pliers | |||
| 4 | Wire nuts | |||
| 5 | Electrical tape | |||
| 6 | Voltage tester | |||
| 7 | Drill | |||
| 8 | Masonry bit | |||
| 9 | Wall anchors | |||
| 10 | Outdoor rated extension cord (if needed) | |||
How to Wire Outdoor Wall Lights
Light Up Your Outdoors: A Step-by-Step Guide to Wiring Wall Lights
Wiring outdoor wall lights can be a tricky task, especially if you're not familiar with electrical work. However, with the right guidance and tools, anyone can wire outdoor wall lights with ease. Here's a step-by-step guide to help you wire your outdoor wall lights safely and correctly.
Step 1: Turn Off Power to the Circuit
Before you start wiring your outdoor wall lights, you need to turn off the power to the circuit. Locate the circuit breaker that controls the power to the area where you'll be working, and turn it off.
Step 2: Remove the Old Light Fixture
If you're replacing an old light fixture, you need to remove it first. Start by removing the screws that hold the fixture in place. Once the screws are removed, gently pull the fixture away from the wall and disconnect the wires.
Step 3: Install the Mounting Bracket
If you're installing a new light fixture, you need to install the mounting bracket first. The mounting bracket is what holds the fixture in place. Follow the manufacturer's instructions to install the bracket securely.
Step 4: Connect the Wires
Next, you need to connect the wires. Start by connecting the black wire from the light fixture to the black wire from the electrical box. Use a wire nut to secure the connection. Repeat this process with the white wire and the green or bare wire.
Step 5: Secure the Wires
Once the wires are connected, you need to secure them with electrical tape. Wrap the tape around the wire nut and the wires to ensure a secure connection. Make sure there are no exposed wires.
Step 6: Attach the Fixture to the Bracket
Now it's time to attach the light fixture to the mounting bracket. Follow the manufacturer's instructions to attach the fixture securely.
Step 7: Turn the Power Back On
Once the fixture is installed, turn the power back on to the circuit. Test the light to make sure it's working properly.
In conclusion, wiring outdoor wall lights may seem daunting, but it's a task that anyone can accomplish with the right tools and guidance. Follow these steps carefully, and you'll have your outdoor wall lights wired safely and correctly in no time.
