How to Install Outdoor Wall Lights on Brick

Installing outdoor wall lights on brick can be a little tricky if you're not familiar with the process. However, with a few simple steps, you can have your new lights installed and shining brightly in no time. Here's how to install outdoor wall lights on brick:

Step 1: Choose the Right Location
Before you start installing your outdoor wall lights, you need to choose the right location. Make sure the area you choose is well-lit and easily accessible. You also need to make sure that the location you choose is near an electrical outlet or wiring.

Step 2: Mark the Location
Once you've chosen the right location, you need to mark the spot where you want to install the light. Use a pencil to mark the center of the location where you want to install the light.

Step 3: Drill a Hole
Using a masonry drill bit, drill a hole where you marked the spot. Make sure the hole is deep enough to accommodate the anchor that will hold the light in place.

Step 4: Insert the Anchor
Insert the anchor into the hole you drilled. Use a hammer to tap the anchor into place until it's flush with the surface of the brick.

Step 5: Attach the Mounting Plate
Attach the mounting plate to the anchor using the screws provided. Make sure the mounting plate is level and secure.

Step 6: Connect the Wiring
Connect the wiring to the light fixture according to the manufacturer's instructions. Make sure the wiring is secure and properly connected.

Step 7: Attach the Light Fixture
Attach the light fixture to the mounting plate using the screws provided. Make sure the light fixture is level and secure.

Step 8: Test the Light
Once the light fixture is attached, turn on the power and test the light to make sure it's working properly.

In conclusion, installing outdoor wall lights on brick is not difficult as long as you follow these simple steps. By doing so, you can add a beautiful and functional element to your outdoor space.